粗镗活塞销孔组合机床专用夹具设计

以下是资料介绍,如需要完整的请充值下载. 本资料已审核过,确保内容和网页里介绍一致.  
无需注册登录,支付后按照提示操作即可获取该资料.
资料介绍:

粗镗活塞销孔组合机床专用夹具设计(任务书,答辩PPT,论文说明书8300字,CAD图纸4张)
摘    要
   根据设计任务书的要求,本设计说明书针对粗镗活塞销孔组合机床的夹具设计进行说明。设计中的专用夹具是为活塞零件的粗镗工序所设计的夹具。此处专用夹具主要包括定位装置、夹紧装置、夹具体及其它装置。设计的主要内容包括研究原始资料,夹具设计初步方案制定,主要零件的设计说明,绘制夹具总装配图,标注尺寸、技术要求、零件编号及编制零件明细表,绘制夹具零件图。设计过程中经过对不同方案的比较,最后确定最优方案。
关键词   活塞销孔  夹具结构设计
  
Abstract
Book design task in accordance with the requirements, the design specification for rough piston pin hole boring machine-specific description of the fixture design. Dedicated fixture design for the Pistons rough boring parts of the fixture design process. Dedicated fixture here include positioning devices, clamping devices, and other device specific folder. The main elements of design including raw data, the preliminary fixture design program development, the design of the main parts that draw the general assembly jig, mark size, technical requirements, part number and schedule of the preparation of parts, drawing parts diagram fixture. The design process through the comparison of different programs, and finally to determine the optimal program.

Keywords:   piston’s thole hole、 fixture  structural  design
 

粗镗活塞销孔组合机床专用夹具设计
粗镗活塞销孔组合机床专用夹具设计
粗镗活塞销孔组合机床专用夹具设计
粗镗活塞销孔组合机床专用夹具设计

     
目  录           
1 前  言    3
2 夹具概述    4
3 活塞零件与组合机床概述    4
3.1 活塞概述    4
3.2 粗镗活塞销孔主要技术条件分析    6
3.3 活塞的材料及毛坯制造    7
3.4 活塞销孔的机械加工工艺过程的分析    7
3.5 机床的主要技术参数以及刀具主要参数    8
3.5.1机床尺寸参数    8
3.5.2机床主要参数计算    9
3.5.3 安装夹具连接部分尺寸    10
4 粗镗活塞销孔专用机床的夹具设计    11
4.1夹具结构的初步设计方案    11
4.1.1工件的定位方案    11
4.1.2夹具的引导方式    11
4.1.3工件的夹紧机构    12
4.1.4夹具体的设计    15
4.1.5传动方式    16
4.2 定位误差分析    17
4.3夹具设计的计算    17
4.3.1原动力计算    17
4.3.2 扳手和螺栓的选用    18
5 夹具(零件)的公差配合和技术条件    18
5.1 夹具公差的制定以及技术条件    18
5.2夹具零件的公差和技术条件    18
6 总结    19
参考文献    20
致   谢    21